GB/T 11606.17-1989 分析仪器环境试验方法 碰撞试验
作者:标准资料网 时间:2024-05-29 06:07:37 浏览:9513
来源:标准资料网
基本信息
| 标准名称： | 分析仪器环境试验方法 碰撞试验 |
| 英文名称： | The method of environmental test for analytical instruments Pump test |
| 中标分类： |
仪器、仪表 >>
物质成分分析仪器与环境监测仪器 >>
物质成分分析仪器与环境检测仪器综合 |
| ICS分类： |
试验 >>
环境试验
|
| 替代情况： | 被GB/T 11606-2007代替 |
| 发布部门： | 中国机械工业联合会 |
| 发布日期： | 1989-03-31 |
| 实施日期： | 1990-03-01 |
| 首发日期： | 1989-03-31 |
| 作废日期： | 2007-12-01 |
| 主管部门： | 中国机械工业联合会 |
| 归口单位： | 全国工业过程测量和控制标准化技术委员会 |
| 起草单位： | 北京分析仪器所 |
| 出版日期： | 1900-01-01 |
| 页数： | 2页 |
适用范围
没有内容
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类： 仪器 仪表 物质成分分析仪器与环境监测仪器 物质成分分析仪器与环境检测仪器综合 试验 环境试验
Product Code:SAE J2602/1
Title:Lin Network for Vehicle Applications
Issuing Committee:Vehicle Architecture For Data Communications Standards
Scope:This document covers the requirements for SAE implementations based on LIN 2.0. Requirements stated in this document will provide a minimum standard level of performance to which all compatible ECUs and media shall be designed. This will assure full serial data communication among all connected devices regardless of supplier.The goal of SAE J2602 is to improve the interoperability and interchangeability of LIN devices within a network by resolving those LIN 2.0 requirements that are ambiguous, conflicting, or optional. Moreover, SAE J2602 provides additional requirements that are not present in LIN 2.0 (e.g., fault tolerant operation, network topology, etc.).This document is to be referenced by the particular vehicle OEM component technical specification that describes any given ECU in which the single wire data link controller and physical layer interface is located. Primarily, the performance of the physical layer is specified in this document. ECU environmental and other requirements, when provided in the component technical specification, shall supercede the requirements of this document.The intended audience includes, but is not limited to, ECU suppliers, LIN controller suppliers, LIN transceiver suppliers, component release engineers and vehicle system engineers.【英文标准名称】:Anaestheticandrespiratoryequipment-Spirometersintendedforthemeasurementoftimeforcedexpiredvolumesinhumans
【原文标准名称】:麻醉和呼吸设备.测量人类计时用力呼气量的肺活量计
【标准号】:BSENISO26782-2009
【标准状态】:现行
【国别】:英国
【发布日期】:2009-10-31
【实施或试行日期】:2009-10-31
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:随附表格;麻醉学;麻醉设备;呼吸设备;兼容性;可混用性;定义;耐久性;名称与符号;诊断(医学);诊断系统;;吸入空气;批注;铭刻;初始的;作标记;使用说明;使用说明书;肺脏;处理;惰性气体铠装电弧焊;作标记;测量范围;医用呼吸器;医疗器械;医疗设备;医疗技术学;;呼吸量;警告;危险管理;安全;规范(验收);;技术通报
【英文主题词】:Accompanyingforms;Anaesthesiology;Anaestheticequipment;Breathingequipment;Compatibility;Definitions;Designations;Diagnosis(medical);Diagnosticsystems;Illness;Inhaledair;Inscription;Instructionsforuse;Lungs;Marking;Measuringranges;Medicalbreathingapparatus;Medicaldevices;Medicalequipment;Medicaltechnology;Respiratorytracts;Respiratoryvolume;Safety;Specification(approval);Spirometers;Technicalnotices
【摘要】:ThisInternationalStandardspecifiesrequirementsforSPIROMETERSintendedfortheassessmentofpulmonaryfunctioninhumansweighingmorethan10kg.ThisInternationalStandardappliestoaSPIROMETERthatmeasuretimedforcedexpiredvolumes,eitheraspartofanintegratedlungfunctiondeviceorasastand-alonedevice,irrespectiveofthemeasuringmethodemployed.DevicesintendedforcontinuouslymonitoringPATIENTSareoutsidethescopeofthisInternationalStandard.
【中国标准分类号】:C46
【国际标准分类号】:11_040_10
【页数】:38P.;A4
【正文语种】:英语
